Hole Pro Carbide Saw (showing results 1-10 of total 92)

|<< 1 2 3 4 5 6 7 8 9 10 >>|

Hole Pro X-230 Kit: 1-7/8" to 9" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades needs ¼ drill power of a hole saw to quickly cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board From: $129.95 The Hole Pro X-230 is a well built tool that makes the task of cutting holes much simpler. If you are required to cut holes into drywall, you cannot live without this tool. It is also capable of cutting woods, plastics, and other materials. This worked great with my puny 14.4v Dewalt drill. The plastic shield does an excellent job of containing dust, debris, and flying chunks. Anyon... 3 product reviews available	HOLE PRO BT-002: Tungsten Carbide Blade Set From: $17.95 Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, Hardi board, lathe & plaster, MDF, fiberglass, aluminum and brass sheet, and some plastics. Used with the X-148, X-230, X-305, X-425, Adjustable Hole Cutters.Tungsten Carbide Steel blade set. For the Hole Pro X-148, X-230, X-305, and X-425 Twin Blade Adjustable Hole Cutters. Replacement blades... No product reviews available
BLUE BOAR TSF12 12 Piece High Performance Tungsten Carbide Hole Saw kit - 2-1/4" Cut Depth. Cut 10x as fast and using 1/40th the battery power. Cordless Drills cut holes 3x as large versus bi-metal hole saws. Deep side gullets for fast plug removal From: $169.95 Used this set to run a new bathroom in a 105yr old house. The wood in this house was extremely hard, but that didn't stop these bits. Cut nice holes very quickly even with the largest bit. Would highly recommend this set! * Hole Cutter may be damaged by nail strikes * Blue Boar Self-Feed Multipurpose TCT Hole Saws for cutting wood, laminates, plaster, OSB, MDF, fiberglass, chipboard, sheetro... 2 product reviews available	Milwaukee 49-56-2753 Hole Saw Carbide Tipped 2-3/4-Inch From: $16.5 49-56-2753 Cutting Diam: 2 3/4 in, 70mm (part 49-56-2753) This item features: -Provides fast cutting and long life. -Not recommended for metal. -Applicable Materials: Plastic, Masonry Materials, Wood. -Cutting Depth: 1 1/2 in. -Cutting Edge Material: Carbide-Tipped. -Teeth Per Inch: 4. -Type: Hole Saw. -Quantity: 1 per pack. -Price is for 1 Each.2-3/4 in. (70 mm) diameter. 1-1/2 in. depth of cu... No product reviews available
Hole Pro X-425 Kit: 1-7/8" to 17" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saws to cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie-board From: $164.95 As a skylight installer, the faster I can get the job done the more money I make. This adjustable hole cutter from Hole Pro saves me time on the job. With the dust shield and its soft rubber edge I get a good seal so shavings don't go all over the place and I don't have to worry about the cut piece falling on something and causing damage. So I don't have to move as much furniture or use drop clot... 2 product reviews available	BLUE BOAR 5-1/2" (140mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica From: $72.9 * Hole Cutter may be damaged by nail strikes * Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites. **** These TCT hole cutters will outperfor... No product reviews available
Hole Pro X-305 Kit 1-7/8" to 12" infinitely adjustable twin blade Tungsten Carbide Hole Saw Cutter 6" 7" 8" 9" 10" 11" 12" holes in wood drywall plaster fiberglass OSB cement board- Use ¼ torque of hole saws and cut twice as fast From: $143.8 I bought the 8" model and it worked so well that I gave it to my partner and bought myself the 12" hole cutter. It is amazing how well it cuts and I can cut the exact size hole from under 2 inches to 12 inches in size. There have been two problems with cutting holes, getting the right size hole saw, and not getting hurt when the hole saw gets stuck and the drill starts to spin around the other dir... 5 product reviews available	Blue Boar 1-1/8" (29mm) Stucco-Brick-Wood & FRP / fiberglass Tungsten Carbide Tipped TCT Hole Saw with 7/16" shank (M16 Thread), 5/16" (8mm) carbide pilot bit, and ejection spring From: $45.5 I have used masonry drills on stucco and it is a time consuming process to make lots of little holes, chisel them out without cracking the stucco or brick and then cutting through the plywood behind the stucco using a hole saw. With the Blue Boar stucco bit the tungsten carbide cutting teeth are massive and quickly chew their way through the stucco and keep right on going through the metal lath an... 1 product reviews available
BLUE BOAR 4-3/4" (121mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica From: $61.4 * Hole Cutter may be damaged by nail strikes * Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites. **** These TCT hole cutters will outperfor... No product reviews available	BLUE BOAR 2" (51mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica From: $29 * Hole Cutter may be damaged by nail strikes * Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites. **** These TCT hole cutters will outperfor... No product reviews available

Recommended Blogs

Paul Harris A» Blog Archive A» BLUE BOAR TUH12 -12 Piece Super Duty ...
BLUE BOAR TUH12 -12 Piece Super Duty Tungsten Carbide Hole Saw kit a€“ 2-1/4a€³Cut Depth. Cut 10x as fast and use 1/40th battery charge. Cordless Drills can cut holes 3x as large as with bi-metal hole saws. Deep side gullets for fast plug removal ... Quickly mounts to any standard 3/8a€³ arbor or with the new Hole Pro XL Arbor for use with Hole Pro dust shields to trap the dust and shavings and control the cutting depth. **** The design of these TCT hole cutters enables drills ...

BLUE BOAR 1-5/8" (41mm) Self-Feed TCT 2-1/4" deep multipurpose ...
TCT Hole cutters cut holes up to 10x faster and lasts up to15x longer than bi-metal hole saws; Carbide tipped teeth quickly cut holes in materials that standard bi-metal hole saws will not cut; 2-1/4" cutting depth and wide range of ...

16mm diamond drill bits - 16mm (5/8a€³) Pro Diamond Opening Saw Core ...
40mm Pro Diamond Opening Saw Core Drill Segment 1 9/16a€³ 40mm NEW 1 9/16" PRO diamond hole saw core drill segment New PROFESSIONAL diamond hole saw core drill 1pcs of 40mm ( 1 9/16" ) professional diamond core. ...

BLUE BOAR 2-1/8a€³ (54mm) Self-Feed TCT 2-1/4a€³ deep multipurpose ...
BLUE BOAR 2-1/2a€³ (64mm) Super Duty Universal TCT 2-1/4a€³ deep tungsten carbide hole saw cuts more materials faster than any other hole saw. Hard RA 90-91 carbide teeth for faster cutting and longer life, ultra deep side gullets for ...

$59.80, Varied 16 a€“ 25mm Pro Diamond Opening Saw Core Drill Bit ...
Varied 16 a€“ 25mm Pro Diamond Opening Saw Core Drill Bit NEW Assorted 16mm to 25mm (5/8" to 1") professional diamond core drill / hole saw. Excellent diamond segment which especailly use on rock or granite, marble, tile, porcelain. ...