Hole Pro Wood Saw (showing results 1-10 of total 86)

|<< 1 2 3 4 5 6 7 8 9 >>|

Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast From: $129.95 I have used a variety of adjustable hole cutters and hole saws for shop and construction work over the years but none that work as well as this twin blade hole cutter. The blade design enables my DeWalt 1/2" cordless drill (manufacturer rated for maximum 3-1/2" hole saw in wood) to cut 10" holes in plywood and Hardie board in less than a minute. Holes in sheetrock take seconds and al... 5 product reviews available	Hole Pro X-305 Kit 1-7/8" to 12" infinitely adjustable twin blade Tungsten Carbide Hole Saw Cutter 6" 7" 8" 9" 10" 11" 12" holes in wood drywall plaster fiberglass OSB cement board- Use ¼ torque of hole saws and cut twice as fast From: $149.95 I bought the 8" model and it worked so well that I gave it to my partner and bought myself the 12" hole cutter. It is amazing how well it cuts and I can cut the exact size hole from under 2 inches to 12 inches in size. There have been two problems with cutting holes, getting the right size hole saw, and not getting hurt when the hole saw gets stuck and the drill starts to spin around the other dir... 5 product reviews available
HOLE PRO BH-002: High Speed Steel (HSS) Blade Set From: $11.95 It is difficult to find hole cutting tools that make neat clean holes in wood, especially laminates, and in plastic. With laminates there is often splintering and tearing of the top layer and with plastic there is often heat buildup which melts the plastic. The Hole Pro adjustable hole cutter using these fine kerf high speed steel blades but a cleaner hole in wood and plastic sheet than anything e... 2 product reviews available	HOLE PRO X-425 Kit 1-7/8" to 17" infinitely adjustable Twin Tungsten Carbide Blade Hole Saw Cutter 12" 13" 14" 15" 16" and fractional holes in wood sheetrock plaster plastics MDF cement board. Use ¼ torque of hole saw cut twice as fast From: $164.95 As a skylight installer, the faster I can get the job done the more money I make. This adjustable hole cutter from Hole Pro saves me time on the job. With the dust shield and its soft rubber edge I get a good seal so shavings don't go all over the place and I don't have to worry about the cut piece falling on something and causing damage. So I don't have to move as much furniture or use drop clot... 4 product reviews available
BLUE BOAR 4-1/4" (108mm) Stucco-Brick & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 10mm carbide pilot bit, ejection spring From: $96 There are times when I need to make a hole in stucco or brick siding with OSB sheathing and in the past it was a very laborious process. I would line drill the stucco or the brick and then chisel it out and then use a hole saw to cut through the OSB - slowly. With the Blue Boar TCT hole cutter I can now use a 18v cordless drill to power through the stucco and the OSB in less than a minute. ... 1 product reviews available	BLUE BOAR TUH14 - 14 Piece Super Duty Tungsten Carbide Hole Saw kit 2-3/8" Cut Depth. Cut 10x as fast and use 1/40th battery charge. Cordless Drills can cut holes 3x as large as with bi-metal hole saws. Deep side gullets for fast plug removal From: $219.95 We do a lot of large projects with dozens of holes in every type of building material and for everything save concrete, these TCT hole cutters are the best we have used. We have used the Bosch and they are quite good though expensive and they don't fit in our existing kits or inside each other even in the Bosch kit case. We have used the new Blue Boar Self-feed models and they are great and far su... 3 product reviews available
BLUE BOAR TSF12 12 Piece High Performance Tungsten Carbide Hole Saw kit 2-1/4" Cut Depth. Cut 10x as fast and using 1/40th the battery power. Cordless Drills cut holes 3x as large versus bi-metal hole saws. Deep side gullets for fast plug removal From: $159.95 I have been frustrated for years with cutting holes in wood with old fashioned hole saws and forget about cutting much else, 2-3 holes in Hardie board or MDF before they are toast. I tried the Milwaukee Big Hawg cutters and they work fantastic in wood but with their high speed steel teeth you are limited to wood - and the only pilot bit they provide is a flat bit for wood. When I saw the Blue Boar... 2 product reviews available	BLUE BOAR 6-1/4" (159mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica From: $83.3 Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, tile (up to Grade 6), vertically perforated brick, clay roofing tiles, concrete cinder block, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites. ... No product reviews available
BLUE BOAR 1-3/4" (45mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica From: $24.5 Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, tile (up to Grade 6), vertically perforated brick, clay roofing tiles, concrete cinder block, Hardie fiber cement board, plywood, chipboard, fand fiber reinforced composites.... No product reviews available	BLUE BOAR 1-1/2" (38mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica From: $21.6 Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, tile (up to Grade 6), vertically perforated brick, clay roofing tiles, concrete cinder block, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites. ... No product reviews available

Recommended Blogs

Motourage A» Johnson Wins Fifth AMA Pro Flat Track Grand National ...
The start of the twenty five lap National saw Johnson on the point with Sammy Halbert right on his heels. As Halbert tried to shoot under Johnson exiting turn two he hit a slick spot starting and started a slow spin right in front of the entire field. ... In the Pro Singles Main, defending Pro Singles Champion Brad Baker got the hole shot on his # 1 Mike Velasco Racing / Brothers Power Sports / Rod Lake backed Honda, but he had a whole horde of riders right behind. ...

Last Ditch Racing takes podium at 100 Acre Wood Regional Rally ...
"Even with our noise canceling intercom, it was incredibly loud and I thought we had another hole on our hands. Driving a bit further on, I realized that, despite the noise, we still had full power and all systems were go." ... The 100 Acre Wood Rally saw Colorado co-driver Adam Kneipp sit with Cassidy for the first time. "It was obvious from the first time that we talked over the phone that Adam is meticulous and goal oriented. Adam slotted into the car and team ...

Pictures Thread Rainbow Germanium / JL Audio re-install work log ...
I've been meaning to post this for some time, but laziness got the better of me. The old system consisted of Boston Pro 60's and Alpine V-Series amps. ... First I cut the hole 1/8" larger than the outside diameter of the sub. Next, using the jig saw I cut out the mounting tabs for the sub. A quick test fit and its perfect. Lastly, the trim piece is glued and stapled to the top of the box. The outside fit wasnt perfect, so a quick pass with a flush trim bit on the router ...